Remove/install extinguishing agent reservoir covering - AR86.10-P-0103SXS

MODEL 221.1 with CODE (Z07) Top protection with fire extinguishing system, without emergency fresh air system 

Fig 1: Identifying Extinguishing Agent Reservoir Covering, Trunk Floor Paneling And Expansion Clip

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove trunk floor paneling (1) and center front trunk floor paneling.		AR68.30-P-4600SXS
2	Remove expansion clips (3)	Check expansion clips (3), replace if necessary
3	Remove extinguishing agent reservoir paneling (2)
4	Install in the reverse order