Mount propeller shaft intermediate bearing - AR41.10-P-0050-11SX
PROPELLER SHAFT INTERMEDIATE BEARING
| Number |
Designation |
Model 216 |
Model 221 |
| BA41.40-P-1001-01E |
Bolt, propeller shaft intermediate bearing to frame floor assembly |
Self-tapping screw |
Nm |
25 |
25 |
| Bolt with washer |
Nm |
- |
30 |
- Mount propeller shaft intermediate bearing.
Insert the bolts (6) for the propeller shaft intermediate bearing but do not tighten. Tighten bolts (6) only after fastening the flex disks to the transmission and rear axle center assembly.
On models 221.154/ 156 the front propeller shaft intermediate bearing is mounted to the vehicle underbody with 2 bolts and the rear propeller shaft intermediate bearing is mounted on the vehicle underbody with 4 bolts.
Shown on propeller shaft intermediate bearing on model 221.171
Courtesy of MERCEDES-BENZ USA