Check propeller shaft flex disks for signs of damage and deformation - AP41.10-P-4152SX
MODEL 216 MODEL 221.0/ 1
MODIFICATION NOTES
| 29.6.10 | Value modified: Self-locking nut, flex disk to transmission or front propeller shaft, M12 | *BA41.10-P-1001-01H | |
| Value modified: Self-locking nut, flex disk to rear propeller shaft or differential, M12 | *BA41.10-P-1002-01H |
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | AS00.00-Z-0010-01A | |
| 1 | Raise vehicle with vehicle lift | AR00.60-P-1000SX | |
| Checking | |||
| 2 | Check flexible couplings (1) for crack formation, fraying, wear, damage and and deformation | Install new flexible couplings (1) as a separate repair order. |
|
| 3 | Retighten threaded connections of flexible couplings (1) | *BA41.10-P-1001-01H *BA41.10-P-1002-01H |
|
| 4 | Lower vehicle |
PROPELLER SHAFT
| Number | Designation | Model 221 | ||
|---|---|---|---|---|
| BA41.10-P-1001-01H | Self-locking nut, flex disk to transmission or front propeller shaft | M12 | Nm | 68 |
| BA41.10-P-1002-01H | Self-locking nut, flex disk to rear propeller shaft or differential | M12 | Nm | 68 |