Seam sealing following repair, side damage - AR97.10-P-4000-03SXS

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1003-01A	White sealing compound, 310 ml, DBL 6069.20	A 001 989 63 20
BR00.45-Z-1041-01A	Seam sealant, sprayable 310 ml	A 002 989 84 20

1 Seal spot welds, rivets and MAG seams in repaired area with seam sealant material.

Do not seal openings between MAG seams.

Leave openings open between MAG seams for coating with wax.

Insert plastic plugs and grommets with sealing compound.

Keep sealant out of threads on weld nuts and threaded bolts by masking or covering with cardboard sleeves. Also keep drain openings and contact surfaces for axle attachments, windows and detachable parts free of sealant.

It is necessary to seal accessible spot weld flanges on both sides. If accessible from one side, only seal corresponding surface. Observe standard seals!

When sealing seams we differentiate between:

A smoothing/wiping

B spreading

Fig 1: Identifying Smoothing/Wiping And Spreading Sealing Seams

Courtesy of MERCEDES-BENZ USA

Area of A-pillar on longitudinal member and left outer connection, shown on model 221 without code Z07

Fig 2: Identifying Longitudinal Member And Left Outer Connection Sealing Area

Courtesy of MERCEDES-BENZ USA

Area of left inner A-pillar, shown on model 221 without code Z07

Fig 3: Identifying Left Inner A-Pillar Sealing Area

Courtesy of MERCEDES-BENZ USA

Area of left A-pillar paneling, shown on model 221 without code Z07

Fig 4: Identifying Left A-Pillar Paneling Sealing Area

Courtesy of MERCEDES-BENZ USA

Area of B-pillar with left inner longitudinal member, shown on model 221 without code Z07

Fig 5: Identifying Left Inner Longitudinal Member B-Pillar Sealing Area

Courtesy of MERCEDES-BENZ USA

Area of entire side left outer longitudinal member, shown on model 221 without code Z07

Fig 6: Identifying Left Outer Longitudinal Member Sealing Area

Courtesy of MERCEDES-BENZ USA

Area of entire left rear fender, shown on model 221 without code Z07

Fig 7: Identifying Left Rear Fender Sealing Area

Courtesy of MERCEDES-BENZ USA

Area of rear fender, side paneling below bumper and left rear lamp cutout, shown on model 221 without code Z07

Fig 8: Identifying Rear Fender, Side Paneling Below Bumper And Left Rear Lamp Cutout Sealing Area

Courtesy of MERCEDES-BENZ USA

Area of entire underfloor, shown on model 221 without code Z07

Fig 9: Identifying Underfloor Sealing Area

Courtesy of MERCEDES-BENZ USA

Area of left rear interior compartment

Fig 10: Identifying Left Rear Interior Compartment Sealing Area

Courtesy of MERCEDES-BENZ USA

Area of door stop bracket

Fig 11: Identifying Door Stop Bracket Sealing Area

Courtesy of MERCEDES-BENZ USA

Area of lower left B-pillar

Area of lower right B-pillar

Fig 12: Identifying Lower Right B-Pillar Sealing Area

Courtesy of MERCEDES-BENZ USA

Area of right B-pillar rear wall

Area of left B-pillar rear wall

Fig 13: Identifying Left And Right B-Pillar Rear Wall Sealing Area

Courtesy of MERCEDES-BENZ USA