LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2007 >> S550 Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission -- Testing & Repair -- S-Class (221) - 3 Of 3 >> Testing & Repair >> Remove/install shield at transmission - AR27.40-P-0700-01SX

Remove/install shield at transmission - AR27.40-P-0700-01SX

TRANSMISSION 722.9 in MODEL 221.0 /1, 216.3 

TRANSMISSION 722.6 in MODEL 221.1, 216.3 

HOUSING

Number Designation Transmission 722.6 except 722.660/661/662/ 663/666/673/674 Transmission 722.9
BA27.40-P-1019-01A Bolt, leaf spring to transmission housing Nm 8 5
HOUSING

Number Designation Transmission 722.6 in model 216, 221
BA27.40-P-1003-01B Bolt, heat shield to transmission housing Nm 10
HOUSING

Number Designation Transmission 722.9 in Model 216, 221
BA27.40-P-1003-01E Bolt, heat shield to transmission housing Nm 10
  1. Remove bolt (1) and remove shield (2) downwards.
  2. Press cable holder (4) out of shield (2) and remove shield (2).

    IMPORTANTInstallation:  The shield (2) must be positioned under the leaf spring (3).

    IMPORTANT The leaf spring (3) must be modified if a new transmission is installed.

    Fig 1: Identifying Shield, Bolt, Leaf Spring And Cable Holder
    G07301420Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals