LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2007 >> S550 Base >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Detachable Body Components -- S-Class (221) >> Testing & Repair >> Prepare body flange for gluing in spare tire well - AR88.30-P-1000-03SX

Prepare body flange for gluing in spare tire well - AR88.30-P-1000-03SX

REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1049-02A Repair kit, installing window, 2-component adhesive A 168 670 00 93
  1. Cut remaining glue off of body flange on spare tire well with scraper

    IMPORTANT A maximum of 2 mm of adhesive residue may be left. Pull off loose adhesive material (remaining pieces which are not completely cut off).

  2. Clean painted bonding surface on spare tire well body flange with cleaner from repair set (BETACLEAN 3300) from 2-component glue set and rub dry with rag.
  3. If glue on spare tire well body flange is damaged or defective, apply paint glass primer (BETAPRIME 5061) from 2-component glue set in area to be glued.

    IMPORTANT Allow primer to air-dry for a minimum of 10 minutes.

  4. Repair paint damages on spare tire well body flange not covered by glue with primer stick

    NOTES In order to prevent adhesion faults when gluing in the spare tire well, the bonding surface of the body flange must be free of dust, oil, grease, wax and other cohesive components or dirt particles.

    IMPORTANT If sheet metal parts are replaced in the area of the spare tire well, treat gluing area of spare tire well with paint/glass primer (BETAPRIME 5061).

scientia non olet · About LEMON Manuals