Replace brake fluid - AP42.00-P-4280RT
MODEL 251
| Removing | |||
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Risk of poisoning caused by swallowing brake fluid. Risk of injury caused by brake fluid coming into contact with skin and eyes. | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | AS42.50-Z-0001-01A | |
| Brake fluid notes | All models | AH42.50-P-0001-01A | |
| Notes on repairs to brake system | All models | AH42.00-P-0003-01A | |
| 1 | Open engine hood and raise to vertical position | ||
| Opening engine hood, moving to upright position and closing | AR88.40-P-1000RT | ||
| 2 | Unscrew cap (11) from brake fluid reservoir (10) | ||
| 3 | Pump brake fluid out of the brake fluid reservoir (10) | ||
| 4 | Pour in new brake fluid up to the "MAX" mark on the brake fluid reservoir (10) | *BF42.10-P-1001-01H | |
| 5 | Connect brake fluid changing unit to brake fluid reservoir (10) | Brake fluid change unit |
|
| 6 | Raise vehicle with vehicle lift | ||
| Lift/jack up vehicle | AR00.60-P-1000RT | ||
| Replace | |||
| 7 | Replace brake fluid | ||
| Bleed brake system | AR42.10-P-0010RT | ||
| *BA42.10-P-1001-10L | |||
| *BA42.10-P-1001-12L | |||
| Install | |||
| 8 | Lower vehicle | ||
| Lift/jack up vehicle | AR00.60-P-1000RT | ||
| 9 | Detach brake fluid changing unit from brake fluid reservoir (10) | Brake fluid change unit | |
| 10 | Correct fluid level in brake fluid reservoir (10) | *BF42.10-P-1001-01H | |
| 11 | Screw cap (11) onto brake fluid reservoir (10) | ||
| 12 | Close engine hood | ||
| Opening engine hood, moving to upright position and closing | AR88.40-P-1000RT |
FRONT AXLE BRAKE CALIPER
| Number | Designation | Model 251 except 251.077/177 | Model 251.077/177 | |
|---|---|---|---|---|
| BA42.10-P-1001-10L | Bleed screw to brake caliper | Nm | 18 | 18 |
REAR AXLE BRAKE CALIPER
| Number | Designation | Model 251 | |
|---|---|---|---|
| BA42.10-P-1001-12L | Bleed screw to brake caliper | Nm | 7 |
BRAKE FLUID
| Number | Designation | Model 251 | ||
|---|---|---|---|---|
| BF42.10-P-1001-01H | Brake fluid | Filling capacity | Liters | ≈ 0, 8 |
| Specifications for Operating Fluids | Specification | DOT 4. See GENERAL BRAKE FLUID | ||
| Specification | MB 331.0 brake fluid A 000 989 08 07 | |||