Remove/install door sill molding - AR68.30-P-4100RTA

MODEL 251 in load compartment 

Shown on model 251.0 with sound system, code 810 

Fig 1: Identifying Door Sill Molding Remove/Install Components - Shown On Model 251.0

Courtesy of MERCEDES-BENZ USA

	Remove/Install
1	Open load compartment floor	See Operator's Manual
2	Remove bolts (1)
3	Unclip door sill molding (2)	Unclip in marked areas (arrows)
		Mounting wedge	Figure
4	Install in the reverse order

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA