Remove/install cover below instrument panel (right) - AR68.10-P-1520RT

MODEL 251 

Shown with air ducting installed 

Fig 1: Identifying Instrument Panel Cover Remove/Install Components (Right)

Courtesy of MERCEDES-BENZ USA

	Remove
1	Unscrew bolts (2) and bolt (3)
2	Lower cover (1)
3	Disconnect electrical connector (4) from front interior socket (X58/17)
4	Disconnect electrical connectors from cockpit voltage distributor (CAN) connector (X30/6)
5	Disconnect electrical connector (5) from right front footwell lamp (E17/15)
6	Remove air ducting (6) from mount	Lay air ducting (6) down in footwell Do not disconnect electrically
7	Remove cover (1)
	Install
8	Install air ducting (6) on cover (1)
9	Connect electrical connector (4) to front interior socket (X58/17)
10	Connect electrical connectors to cockpit voltage distributor (CAN) connector (X30/6)
11	Connect electrical connector (5) to right front footwell lamp (E17/15)
12	Install cover (1)	Ensure that air ducting (6) is installed correctly.
13	Screw in bolts (2) and bolt (3)	Note installation position of bolt (3).