Legend of wiring diagram for remote trunk closing control unit - PE72.30-P-2101-60RAA
Model 251 up to model year 08/YoM 07 with CODE (890) EASY-PACK liftgate control unit N121/1
| Code | Designation | Coordinates |
|---|---|---|
| A0 | Color code key | 23L |
| B24/16 | Rear-end door opening angle recognition sensor | 22L |
| B24/16x1 | Rear-end door opening angle recognition sensor connector | 21J |
| B86/1 | Left rear-end door closing obstruction sensor strip | 9L |
| B86/1x1 | Left rear-end door closing obstruction sensor strip connector | 9J |
| B86/2 | Right rear-end door closing obstruction sensor strip | 10L |
| B86/2x1 | Right rear-end door closing obstruction sensor strip connector | 10J |
| F4 | Load compartment fuse and relay box | 3L |
| F4f40 | Fuse 40 | 2L |
| H4/60 | Rear-end door closing warning buzzer | 12L |
| M51/1 | Rear-end door hydraulic pump | 16L |
| M51/1 | Rear-end door hydraulic pump | 18L |
| M51/1x1 | Rear-end door hydraulic pump connector | 16J |
| M51/1x1 | Rear-end door hydraulic pump connector | 18J |
| N121/1 | Rear-end door closing control module | 4A |
| N121/1 | Rear-end door closing control module | 12A |
| N121/1 | Rear-end door closing control module | 19A |
| S62/26 | RWTS button | 13L |
| W6 | Ground (left wheel well in luggage compartment) | 3E |
| X8/4 | Rear-end door separation point | 11E |
| X30/7 | Voltage distributor (CAN) connector | 7L |
| Y102 | Automatic rear-end door closing control valve | 20L |