Remove/install speakers in side paneling (rear) - AR82.62-P-7837RT

MODEL 251 with CODE (810) Sound system 

Illustrated on model 251.1 

Fig 1: Identifying Speakers In Side Paneling (Rear) Remove/Install Components - Illustrated On Model 251.1

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Information on preventing damage to electronic components due to electrostatic discharge	All models	AH54.00-P-0001-01A
	The removal and installation operation is identical for both the left rear surround speaker (H4/54) and the right rear surround speaker (H4/57)
1	Remove side load compartment paneling (1)		AR68.30-P-4800RT
		Mounting wedge	Figure
		Long wedge	Figure
2	Remove D-pillar paneling (2)	Do not  unscrew end of belt, set down D-pillar paneling (2) with belt still threaded, outside of working area.	AR68.30-P-4495RT
		Mounting wedge	Figure
		Long wedge	Figure
3	Unclip and disconnect electrical connector (3)
4	Unscrew bolt (4)
5	Push left rear surround speaker (H4/54) or right rear surround speaker (H4/57) to the rear (arrow) and remove	Insert lugs (5) into metal rail correctly, push left rear surround speaker (H4/54) or right rear surround speaker (H4/57) all the way to the front.
6	Install in the reverse order

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA