Remove/install headlamp cleaning system washer fluid hose - AR82.15-P-6201RT

MODEL 251 with CODE (600) Headlamp cleaning system 

Fig 1: Identifying Headlamp Cleaning System Washer Fluid Hose Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
1	Remove front section of fender liner in front fender	On both sides of vehicle.	AR88.10-P-1310RT
2	Separate washer fluid hose (1) on connection element (2) from HCS pump (M5/2)	Catch washing water flowing out of washer fluid hose (1) and washer fluid reservoir in suitable vessel.
3	Separate washer fluid hose (1) on connection element (3) from telescopic nozzle (4) and remove connection element (5) from telescopic nozzle (6).
4	Pull washer fluid hose (1) out of crossmember (7)
5	Install in the reverse order
6	Fill washer fluid reservoir
	Windshield washer system - inspect fluid level, adjust to correct level		AP82.35-P-8210RT
7	Perform function test on headlamp cleaning system	Switch on ignition and check pump for proper function by actuating combination switch. A sufficient quantity of washer fluid must spray out of the spray nozzle.