Remove/install bottom engine compartment paneling - AR61.20-P-1105RT

MODEL 251 with ENGINE 113, 156, 272, 273, 276 

Shown on vehicle without USA version, code 494 and engine 156 

Fig 1: Identifying Bottom Engine Compartment Paneling Remove/Install Components - Shown On Vehicle Without USA Version

Courtesy of MERCEDES-BENZ USA

Shown on underfloor paneling on vehicle without USA version, code 494 and engine 156 

Fig 2: Identifying Bottom Engine Compartment Paneling Remove/Install Components - Shown On Vehicle Without USA Version

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
1	Lift vehicle with two-post lift		AR00.60-P-1000RT
2	Remove bolts (4)	Except engine 156. Except vehicles with USA version, code 494. 8 bolts (4).
3	Remove rear engine compartment paneling (2)	Except engine 156. Except vehicles with USA version, code 494. Do not loose washers (5) when removing rear engine compartment paneling (2). When installing ensure that washer (5) is seated correctly.
4	Remove bolt (3)	6 bolts (3).
5	Remove front engine compartment paneling (1)
6	Install in the reverse order