Air Intake, Turbo Charging - 251 Chassis
- General Information
- Testing & Repair
- Remove/install air filter housing
- Remove/install engine intake air duct downstream of air filter - AR09.10-P-8130GZB
- Remove/install air duct housing - AR09.20-P-0080GZA
- Remove/install inlet port shutoff - AR09.20-P-1314GZB
- Remove/install intake port shutoff sensor - AR09.20-P-1315GZC
- Remove/install mixing chamber - AR09.20-P-1320GZB
- Remove/install resonance intake manifold
- Remove/install the tumble flap and resonance flap switchover valve at the intake manifold - AR09.20-P-1990GZD
- Remove/install the tumble flap position sensor at intake manifold - AR09.20-P-1995GZA
- Remove/install turbocharger - AR09.40-P-6020RTB
- Remove/install oil supply connection fitting of turbocharger - AR09.40-P-6023GZB
- Remove/install noise damper downstream of charge air cooler - AR09.40-P-6925GZB
- Bolt plan for charge air manifold - AR09.41-P-1310-01PI
- Remove/install charge air manifold - AR09.41-P-1310GZB
- Remove/install the throttle valve positioner - AR09.41-P-1321GZB
- Remove/install charge air cooler
- Remove/install charge air hose upstream of charge air cooler - AR09.41-P-8621GZB
- Removing/installing the charge air hose upstream of the charge air cooler - AR09.41-P-8621RTB
- Remove/install engine charge air channel at turbocharger - AR09.41-P-8622GZB
- Remove/install engine charge air duct upstream of charge air cooler - AR09.41-P-8623GZB
- Remove/install engine charge air channel downstream of charge air cooler - AR09.41-P-8624GZB
- Remove/install charge air hose downstream of the charge air cooler
- Test & Adjustment Values
- Maintenance
- Torque Specifications
- Wiring Diagrams
- Special Tools