Legend for function schematic of electrical system, backup camera - PE54.65-P-2051-60RAA
Model 251.0/1 with CODE (218) Reversing camera except CODE (498) Japan version as of model year 09/YoM 08
| Code | Designation | Coordinates |
|---|---|---|
| A8/1 | Transmitter key | 7K |
| A40/3 | COMAND operating, display and controller unit | 3A |
| A80 | Intelligent servo module for DIRECT SELECT | 11B |
| B84/3 | Backup camera | 3H |
| N10/8 | Rear SAM control unit | 6E |
| N66/10 | Backup camera voltage supply module | 3E |
| N73 | EIS [EZS] control unit | 7J |
| N93 | Central gateway control unit | 11E |
| CAN B | Interior CAN | 7H |
| CAN B | Interior CAN | 9F |
| CAN C | Engine compartment CAN | 11D |
| 1 | Reverse gear, status | 8E |
| 1 | Reverse gear, status | 12E |
| 2 | Circuit 15, status | 7G |
| 3 | Backup camera power supply module, actuation | 4E |
| 4 | Backup camera, actuation | 2H |
| 5 | Backup camera, signal | 3C |
| 5 | Backup camera, signal | 3G |