Legend of electrical function schematic for wiper startup suppression - PE82.30-P-2052-60RAA
Model 251.0/1 as of model year 09/YoM 08
| Code | Designation | Coordinates |
|---|---|---|
| A1 | Instrument cluster | 14B |
| A8/1 | Transmitter key | 10B |
| A80 | Intelligent servo module for DIRECT SELECT | 2A |
| M6/1 | Wiper motor | 6H |
| M14/5s1 | Right front door rotary tumbler microswitch | 14K |
| M14/6s1 | Left front door rotary tumbler microswitch | 14K |
| N10 | Front SAM control unit | 9E |
| N10/8 | Rear SAM control unit | 13G |
| N73 | EIS [EZS] control unit | 9A |
| N80 | Steering column module | 5B |
| N93 | Central gateway control unit | 5E |
| S4 | Combination switch | 4A |
| CAN B | Interior CAN | 7E |
| CAN B | Interior CAN | 9D |
| CAN B | Interior CAN | 11E |
| CAN B | Interior CAN | 11F |
| CAN C | Engine compartment CAN | 3E |
| CAN C | Engine compartment CAN | 5D |
| 1 | Circuit 15, status | 9D |
| 2 | Combination switch, status | 5D |
| 2 | Combination switch, status | 8E |
| 3 | Rotary tumbler microswitch, status | 10F |
| 3 | Rotary tumbler microswitch, status | 14J |
| 4 | Vehicle speed, signal | 10E |
| 5 | Reverse gear, status | 4E |
| 5 | Reverse gear, status | 7E |
| 6 | Wiper motor, actuation | 7H |