Legend of electrical function schematic for windshield wipe-stop function - PE82.30-P-2054-60RAA
Model 251.0/1 as of model year 09/YoM 08
| Code | Designation | Coordinates |
|---|---|---|
| A1 | Instrument cluster | 11B |
| A8/1 | Transmitter key | 8B |
| M6/1 | Wiper motor | 4H |
| N10 | Front SAM control unit | 7E |
| N10/8 | Rear SAM control unit | 11G |
| N73 | EIS [EZS] control unit | 7A |
| N80 | Steering column module | 3B |
| N93 | Central gateway control unit | 3E |
| S4 | Combination switch | 2A |
| S62 | ATA [EDW] hood switch | 11K |
| CAN B | Interior CAN | 5E |
| CAN B | Interior CAN | 7D |
| CAN B | Interior CAN | 9E |
| CAN B | Interior CAN | 9F |
| CAN C | Engine compartment CAN | 3D |
| 1 | Circuit 15, status | 7D |
| 2 | Combination switch, status | 3D |
| 2 | Combination switch, status | 6E |
| 3 | ATA [EDW] engine hood switch, status | 8F |
| 3 | ATA [EDW] engine hood switch, status | 12J |
| 4 | Vehicle speed, signal | 8E |
| 5 | Wiper motor, actuation | 5H |