Retrofit Tablet PC mount - AZ82.80-P-0003RTA
MODEL 251.### (except 251.177) 1# with CODE (866) Rear entertainment preinstallation
| Remove | |||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| 1 | Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit | ||
| 2 | Detach cargo area fuse and relay box | AR54.15-P-1261RT | |
| Install | |||
| 3 | Retrofit Tablet PC mount (3) bracket | AZ82.80-P-0003-04GQA | |
| Risk of injury caused by burns to skin and eyes, risk of poisoning caused by inhaling fumes during soldering. | Wear protective gloves, protective clothing and safety glasses. Ensure that the work area is adequately ventilated. Secure power supply cables. Avoid sources of fire in working area. | AS00.19-Z-0002-01A | |
| 4 | Retrofit Tablet PC mount (3) wiring harness | Hot air blower | AZ82.80-P-0003-02GZB |
| Figure | |||
| Figure | |||
| 5 | Retrofit Tablet PC mount (3) | AZ82.80-P-0003-03GQA | |
| 6 | Install remaining parts | ||
| 7 | Document retrofitted equipment using vehicle documentation (VeDoc) | ||
| 8 | Perform function test |
PARTS ORDERING NOTES
| Part no. | Designation | Quantity |
|---|---|---|
| see ODUS | Tablet PC mount parts kit | 1 |