Retrofit iPod - AZ82.60-P-0014GZ

MODEL 164 except CODE (498) Japan version 

Installation into glove box, 

except retrofitted handsfree system FSE12 

Fig 1: Identifying Glove Compartment, Cradle And Ipod

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
1	Remove radio
			AR82.60-P-7502GZ
2	Remove cover below dashboard (on right)
			AR68.10-P-1520GZ
3	Remove right front door sill molding
			AR68.30-P-4100GZ
4	Remove paneling in right footwell
			AR68.30-P-4010GZ
5	Remove glove compartment
			AR68.10-P-1400GZ
	Install
6	Retrofit iPod interface wiring harness		AZ82.60-P-0001-01GZ
7	Retrofit iPod wiring harness		AZ82.60-P-0001-02GZ
8	Glue cradle (15) into glove box (9) using MB universal adhesive as per picture	MB universal glue	*BR00.45-Z-1003-02A
9	Retrofit iPod interface		AZ82.60-P-0001-03GZ
10	Install remaining parts onto vehicle	Steps 5 up to 1.
11	Connect iPod connector to iPod (18)
12	Place iPod (18) into cradle (15)
13	Perform retrofit variant coding		AZ54.65-P-0001-08Q
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-P-2000-04A