Removing/installing the engine cover - AR01.10-P-2405GZ (ML500)

ENGINE 113.964 in MODEL 164.175 

Fig 1: Identifying Engine Cover Remove/Install Components

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Removing/installing
	Risk of injury  caused by fingers being jammed or pinched  when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	When moving components, ensure that no body parts or limbs are within the operating range of moving parts.	AS00.00-Z-0011-01A
1	Open engine hood		AR88.40-P-1000GZ
2	Unclip mounting clamps (1, 2) by raising the engine cover somewhat (arrows A)	When unclipping the engine cover just raise the it slightly in the area of the mounting clamps otherwise the cover could break.
3	Unclip fixing clips (1, 2) by pulling out the front engine cover slightly to the front (arrow B)
4	Remove engine cover
5	Install in reverse order