Rear control panel control unit, component description - GF83.40-P-3020GZU
MODEL 164 with CODE (581) Comfort automatic air conditioning with CODE (494) USA version
Location
The RCP [HBF] control unit is located in the extension of the center console near the 2nd seat row.
Design
- Button for increasing the air flow (1)
- Temperature adjusting ring (2)
- Automatic button (3)
- Button for air distribution in head area (4)
- Button for air distribution in footwell (5)
- OFF button (6)
- Air volume display (7)
- Button for decreasing the air flow (8)
With the RCP [HBF] control unit it is possible to operate the following:
- Switching the temperature control on and off
- Cold/warm interior temperature selection separately for left and right
- Manual blower control
- Manual air distribution
- Automatic blower control and air distribution
Discrete inputs:
- Tml. 30
- Term. 31
The RCP [HBF] control unit is a participant of the CAN-B.
Control options
Temperature adjusting ring
The desired specified temperature for the rear compartment can be set by turning the temperature adjusting ring.
Button for increasing the air flow/button for decreasing the air flow
The air flow can be selected manually by pressing the particular button.
Air volume display
The display is by means of particular LEDs that are coming on.
The more LEDs are illuminated, the higher the air volume routed into the vehicle interior.
Automatic button
The air volume and the air distribution are controlled automatically when the Automatic button has been pressed. When the automatic mode is activated, the function LED comes on.
OFF button
When the OFF button is pressed, the temperature control in the rear is switched off completely and on again. The rear shutoff flap is closed or opened accordingly.
Air distribution buttons
The air distribution into the individual areas can be controlled by pressing the particular button.