Replace shock absorber mount on lower control arm of front axle - AR32.25-P-0111GZ
MODEL 164
| Remove/install | |||
|---|---|---|---|
| Notes on self-locking nuts and bolts | AH00.00-N-0001-01A | ||
| Notes on repair work on suspension components | AH00.00-P-0100-01A | ||
| 1 | Secure vehicle on vehicle lift | AR00.60-P-0100GZ | |
| 2 | Empty AIRmatic using STAR DIAGNOSIS | With CODE 489 (Airmatic (air suspension with level adjustment and adaptive damping system ADS)) Empty and fill the AIRmatic as per the specifications; the complete wheels must not be touching the ground. The air springs can otherwise be damaged and fail later. |
AD00.00-P-2000-04A |
| 3 | Detach link rod from stabilizer bar | Detach link rod carefully, stabilizer bar is under tension. | |
| *BA32.20-P-1004-02L | |||
| 4 | Relieve threaded connection for shock absorber on lower control arm (3) using transmission jack | ||
| 5 | Unscrew bolt (1) | *BA32.25-P-1002-01G | |
| 6 | Lower the lower control arm (3) | ||
| 7 | Remove shock absorber (4) | Installation:
Do not exceed 140 bar pressure. Otherwise the shock absorber mount (4) may be damaged Installation: Press in shock absorber mount (4) from front. Use separate parts C and D of removal, insertion tool (5). Press out shock absorber mount (4) to front. Use separate parts A and E of removal, insertion tool (5). |
|
| Fig 2 | |||
| Fig 4 | |||
| Fig 5 | |||
| Fig 3 | |||
| Fig 6 | |||
| Fig 7 | |||
| 8 | Install in the reverse order |
FRONT AXLE STABILIZER BAR
| Number | Designation | Model 164.1/8 | ||
|---|---|---|---|---|
| BA32.20-P-1004-02L | Nut, link rod to stabilizer bar | Stage 1 | Nm | 100 |
| 2nd stage loosen | ∠° | 180 | ||
| Stage 3 | Nm | 120 | ||
| Stage 4 | ∠° | 45 | ||
FRONT AXLE SHOCK ABSORBER
| Number | Designation | Model 164.1/8 | ||
|---|---|---|---|---|
| BA32.25-P-1002-01G | Self-locking nut, shock absorber to wishbone | Nm | 265 | |