Remove/install bass module speaker - AR82.62-P-7839GZ

MODEL 164 with CODE (810) Sound system 

Shown on model 164.1 

Fig 1: Identifying Subwoofer, Electrical Connector, Plastic Nuts And Cover (Model 164.1)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Shown on model 164.8 

Fig 2: Identifying Subwoofer, Electrical Connector, Plastic Nuts And Cover (Model 164.8)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/install
1	Remove cover (1)	Model 164.1. Left-hand side.
2	Remove side paneling in trunk	Model 164.8. right side.	AR68.30-P-4800RT
3	Unscrew plastic nuts (2).
4	Remove subwoofer (H4/29)	Installation:  In model 164.1 do not damage wiring harness! For vehicles with power glass tilting/sliding roof, code 414, do not damage water drain hose!
5	Disconnect electrical connector (3)
6	Install in the reverse order