Install side portal with portal straightening set - AR60.20-P-1550-01GY

Fig 1: Identifying Portal Frame (129 589 03 23 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Inspection and Welding Devices (164 589 00 23 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 3: Identifying Welding Device (164 589 03 23 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1007-06A	Reversible ratchet
WH58.30-Z-1010-06A	Socket SW19 for hexagon head screws
WH58.30-Z-1026-06A	Screwdriver bit, 8 mm for hexagon socket head screws
WH58.30-Z-1001-11A	Double end box wrench, offset, 17 x 19 mm
WH58.30-Z-1002-11A	Double end box wrench, offset, 22 x 24 mm

WORKSHOP EQUIPMENT

WE58.40-Z-1008-03A

Pneumatic ratchet

A and B-pillar portal setup

Fig 4: Identifying A And B-Pillar Portal Setup

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

B, C and D-pillar portal setup

Fig 5: Identifying B, C And D-Pillar Portal Setup

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

The figures show the setup for body work on the A, B, C and D-pillars.

Install MZ elements, portal frame, inspection and welding device and welding device.
Position and exact setup of the MZ elements are given in the relevant Celette setup plan.

MZ elements

When installing the MZ elements on the straightening bench, the direction of the arrow on the MZ elements must be observed
The part numbers for the MZ elements are cast onto the side

Inspection and welding device and welding device:

Direction of arrow of inspection and welding device or of welding device always in the direction of travel
The inspection and welding device and the welding device on the left side additionally have on "L" next to the arrow
The position number in combination with the 8-digit reference number (e.g.: 7169.7001), is also the order number for replacement parts

Always setup the right side of the straightening bench analog to the left side.