Remove/install license plate lamps - AR82.10-P-5161GZ

MODEL 164 

Illustrated on model 164.1 

Fig 1: Identifying Seal And Bolts Of License Plate Lamps

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/install
1	Remove bolts (1)
2	Pry out license plate lamp, left rear-end door (E19/3) or license plate lamp, right rear-end door (E19/4) using suitable tool	Installation:  Check condition of license plate lamp's gasket (2) and gasket seating.
		Long wedge	Figure
3	Install in the reverse order
4	Perform a function test

Fig 2: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.