Remove/install additional turn signal lamp - AR82.25-P-4726GZ

MODEL 164 

Illustrated on left outside rearview mirror 

Fig 1: Identifying Additional Turn Signal Lamp Components Location

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/Install
1	Remove trim panel of outside mirror (1)		AR88.70-P-9040GZ
2	Remove bolt (2).
3	Remove ambient lamp (3) from the outside mirror paneling (1)
4	Remove the left outside mirror turn signal lamp (E6/5) or the right outside mirror turn signal lamp (E6/6) from the outside rearview mirror cover (1)
5	Install in the reverse order
6	Perform a function test