Remove/install wheels, rotate if necessary - AP40.10-P-4050G

MODEL 460, 461, 463 

Fig 1: Identifying Wheels Bolts Tightening Sequence & Interchange of Assemblies

Courtesy of MERCEDES-BENZ USA

MODIFICATION NOTES

23.3.11

Information on bolted wheel connection added

Operation step 4

	Removing
	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
1	Hoist vehicle with lifting platform until wheels are free		AR00.60-P-1000G
2	Unscrew wheel bolts or unscrew wheel nuts and remove wheel-and-tire assemblies using wheel lift	Wheel lift/wheel lift truck gotis://F_40.1_06.0
	Check
3	Check tires for damage and condition, measure tread depth and note down measurements on maintenance sheet		AP40.10-P-4051GM
	Information on tires / rims		AH40.10-P-9411-01A
4	Clean and check wheel bolt connection components, then protect against corrosion	Before mounting a wheel-and-tire assembly all the operation steps listed in the linked description must be conducted carefully. Otherwise the wheel-and-tire assembly may work its way loose from the vehicle and cause damage to people, property or the environment!	AP40.10-P-4050-01A
		Cleaner from package	*BR00.45-Z-1028-04A
		Long-life grease	*BR00.45-Z-1001-06A
	Install
5	Change round wheel-and-tire assemblies on front and rear axles	If necessary Maintain running direction of wheel-and-tire assemblies. Otherwise handling characteristics and handling comfort may be impaired and tire wear increased.
6	Mount wheel-and-tire assemblies using wheel lift and tighten wheel bolts or wheel nuts	Use wheel bolts or wheel nuts appropriate for steel and light alloy disk wheels. Observe the tightening sequence (1 to 5) and tightening torque.
		Wheel bolt, sheet-steel disk wheel	*BA40.10-P-1001-03A
		Wheel bolt, light-alloy disk wheel	*BA40.10-P-1002-03A
		Wheel nut for sheet steel disk wheel	*BA40.10-P-1003-03A
		Wheel nut for light alloy disk wheel	*BA40.10-P-1004-03A
		Wheel nut for light alloy disk wheel (two-piece)	*BA40.10-P-1005-03A
7	Lower vehicle
8	Correct tire pressure for all wheel-and-tire assemblies	Tire inflation devices - mobile - with /without reservoir gotis://F_40.1_09.2	AP40.15-P-4060G

DISK WHEELS

Number	Designation		Model 460, 461, 463
BA40.10-P-1001-03A	Wheel bolt, sheet-steel disk wheel	Nm	180
BA40.10-P-1002-03A	Wheel bolt, light-alloy disk wheel	Nm	130
BA40.10-P-1003-03A	Wheel nut for sheet steel disk wheel	Nm	180
BA40.10-P-1004-03A	Wheel nut for light alloy disk wheel	Nm	150
BA40.10-P-1005-03A	Wheel nut for light alloy disk wheel (two-piece)	Nm	175

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1028-04A	Cleaner from package	Adolf Wurth GmbH & Co. KG Reinhold-Wurth-Str. 12-17 74653 Kunzelsau-Gaisbach Germany Tel. +49 7940 15-0 Fax +49 7940 15-1000 www.wuerth.de
BR00.45-Z-1001-06A	Long-life grease	A 000 989 63 51 11