Operating the deployment device - AR91.60-P-0611-04A
| Risk of injury . Injuries may result when performing testing or repair work on airbag or emergency tensioning retractor units. | Store airbag unit with expulsion area on top, do not subject to temperatures above 100 °C. When working on these units, disconnect the power supply. | AS91.00-Z-0001-01A | |
| Risk of injury . Injuries may result when performing testing or repair work on airbag or emergency tensioning retractor units. | Models 124, 129 up to 30.6.93, 140, 202 up to 30.6.93 Store airbag unit with expulsion area on top, do not subject to temperatures above 100 °C. When working on these units, disconnect power supply and unplug the SRS test connector (X11/13). |
AS91.00-Z-0001-01B | |
| Notes on controlled deployment of airbag, side airbag and emergency tensioning retractor units | Models 163, 168, 170, 202, 203, 208, 209 210, 215, 220, 230, 240, 414, 461, 463 | AH91.60-P-0611-02P | |
| Notes on disposal of airbags and emergency tensioning retractors | All models | OS91.00-P-0001-01A |
| For testing arrangement, turn rotary switch of deployment device to position | Cable set plug, no. up to 6/93 | Cable set plug, no. as of 7/93 | Test scope | Press: Keys | Specified value: LED | Possible causes for deviation from specified value | |
| 1 | Internal battery test | ON ON |
Replace any battery set for ignition device: 2 Baby cells (2 x 1.5 V) | ||||
| 1 | 3+4 | 10+11 | Actuation of driver side squib | Press both pushbuttons | 1. Before actuation |
ON | Trigger circuit is defective |
| 2 | 1+2 | 1+2 | Deployment of emergency tensioning retractor | Press both pushbuttons | Deployment makes a bang | Trigger circuit is defective | |
| 3+4 | 3+4 | squib, left seat Deployment of emergency tensioning retractor squib, right seat | |||||
| 3 | 5+6 | 13+14 | Ignition Front passenger squib | Press both pushbuttons | 2. After deployment |
ON | Trigger circuit is defective ON |