Remove and install wiper arm - AR82.30-P-6100A

MODEL 461, 463 

Fig 1: Removing/Installing Wiper Arm

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Risk of injury caused by moving parts that can pinch, crush or, in extreme cases even sever extremities.	Always remove ignition key when working on windshield wiper mechanism.	AS82.30-Z-0001-01A
1	Withdraw ignition key
2	Fold open cover (1)
3	Unscrew nut (2)		*BA82.30-P-1003-01B
4	Detach wiper arm (3)	Wiper arm (3) is connected with axle of wiper bearing via a fine toothed taper. Installation:  Adjust the wiper blade horizontally on the bottom edge of the windshield.	Fig 2
5	Install in the reverse order

WINDSHIELD WIPER

Number	Designation		Model 461, 463
BA82.30-P-1003-01B	Nut on wiper arm	Nm	16

Fig 2: Identifying Puller (001 589 38 33 00)

Courtesy of MERCEDES-BENZ USA