Instrument cluster (IC), operating information - GF54.30-P-0002-05G

MODEL 463.306 /336 /346 up to 31.5.12 as of Model Year 2011 /YoM 10 

MODEL 463.202 /222 /236 /237 up to 31.5.12 as of Model Year 2009 /YoM 08 

MODEL 463.247 /248 /249 /254 up to 31.8.08 as of Model Year 2007 Model year 07.5, modification 

Operating instructions 

Via the left multifunction steering wheel button group (S110) and via the right multifunction steering wheel button group (S111) the various menu levels can be displayed in the multifunction display (A1p13) and various system functions activated, disabled or settings changed.

Calling up display of different systems 

By operating the system selection button (S110s3) the multifunction display is switched over to the basic display of the next system or to the "Settings" function.

If all the systems have been run through, one again reaches the basic display of the base function and the sequence starts again from the beginning (ring memory).

Scrolling within a system 

In addition to the main screen, most systems also feature other screens. The scroll forward/back button (S110s1) is used to scroll within a system.

Each time the scroll forward/back button is pressed the display jumps on accordingly.

You can jump to another system from any screen by pressing the system selection button. The basic display of this system then appears.

Individual settings (second level) 

Procedure:

1. Press the system selection button until the "settings" function appears in the multifunction display.
2. Press the scroll forward/back button until the display of the setting to be changed appears in the multifunction display.
3. Press the button + and -, setting of specific functions and volume control (S111s1) towards + or - until the arrow in the display is on the desired value.

All individual settings are also possible while driving except for the driving lights setting.

Overview of available menus (equipment-dependent): 

• "Base function"
  • Standard display
  • Tire pressure display (for model 463.237/249/271 and model 463.202/222/236/248/270/303/306/336/340/341/346 with code (RY6) Tire pressure monitor (TPM))
  • Digital speedometer or outside temperature
  • Remaining distance until service
• "Audio"
  • Radio channels
  • CD player or CD-changer
  • DVD player or DVD changer
  • MP3 title
• "Navigation"
  • Navigation instructions
• "Fault and warning messages"
  • Call up messages
• "Adjustments"
  • Reset to manufacturer default setting
  • Instrument cluster (A1)
  • Lighting
  • Vehicle adjustments
  • Heater (with code (H12) Auxiliary heater)
  • Comfort
• "Trip computer"
  • After start
    • Driving time
    • Travel distance
    • Average speed
    • Average consumption
  • After reset
    • Driving time
    • Travel distance
    • Average speed
    • Average consumption
  • Range
• "Telephone"

In the settings menu there are several other submenus in which the functions can be adjusted, activated and disabled. These are:

• Instrument cluster
  • Temperature display
  • Distance unit
  • Language
  • Display for status line
• Illumination
  • Driving lights: manual/Daytime running lights
  • Ambient illumination: On/Off
  • Interior light OFF delay time: On/Off
  • Headlamp switch-off delay: On/Off
• Vehicle settings
  • Automatic door locking: ON/OFF
  • Radio station selection
• Heater
  • Select switch-on time of stationary heater
  • Change switch-on time of stationary heater
• Comfort
  • Access aid: ON/OFF
  • Key dependency
  • Parking assist mirror adjustment

Reset to manufacturer default settings 

The individual settings can be reset path-specific or overall to the manufacturer default settings with the instrument illumination variable resistor (A1r1).

Path-specific reset:

The settings which have been changed individually can be reset separately to the manufacturer default setting. All subsettings are also reset in the process.

Perform reset process:

To reset the settings the instrument illumination variable resistor must be pressed for longer than t = 3 s. The request "Set to manufacturer default setting?" appears in the multifunction display.

After this instrument illumination variable resistor must be pressed again, only then are the settings reset to the manufacturer default setting.

The successful reset is displayed by an acknowledgment message in the multifunction display. In the event of a fault an incomplete reset is displayed in the multifunction display.

If the instrument illumination variable resistor is not operated for t = 10 s, the reset operation is terminated automatically and the display jumps back to the previous menu display.

Total reset:

If the reset is called up in the start display of the "Settings" menu, the values in all submenus are reset.