Replace clip bottom section - AR77.20-P-0500-03EA

Puller hook for clip bottom section on tilting/sliding roof trim

WF58.50-P-7720-03A

1. Install extraction hook in clip bottom section
2. Push back catch (arrow) and pull clip bottom section downward.
3. Hold bottom section of clip and also push back arrest on opposite side with extraction hook until the clip bottom section can be pulled out of the tilting/sliding roof cover.
4. Press new clip bottom section into tilting/sliding roof panel.
   Fig 1: Pushing Back Catch

   Courtesy of MERCEDES-BENZ USA