LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2007 >> E320 >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seats, Restraint Systems >> General Information >> Assessment of airbag and belt tensioner units in accident vehicles - AH91.00-P-0006-01B

Assessment of airbag and belt tensioner units in accident vehicles - AH91.00-P-0006-01B

Model 129 as of 1.7.93,163,164,168, 169, 170, 171, 172, 197, 199, 202 as of 1.7.93, 203, 204, 207, 208, 209, 210, 211, 212, 215, 216, 218, 219, 220, 221, 230, 240, 245, 251,414, 461 as of 1.4.94, 463, 636, 638, 639, 901, 902, 903, 904, 905, Model WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 

IMPORTANT A new restraint system control unit must be programmed and parameterized after installation.

IMPORTANT After the driver airbag has been deployed, the steering wheel and steering column tubes with crash element must be replaced.

If axial play or a noise is detected at the steering column tube, this must also be replaced, even if the airbag was not deployed.

For the following model designations

Model 129

Model 163

MODEL 168

Model 170

Model 202

Model 203 without code 494

Model 203 without code 275

MODEL 208

Model 209 without code 494

Model 209 without code 275

Model 210 without code 275

Model 169 without code 441

Model 245 without code 441

an exchange of the steering column tube can possibly be avoided if the above criteria have not been met.

Proper function of the steering column tube is only guaranteed if the crash element is not damaged in any manner.

The dashboard must be replaced after the front passenger airbag has deployed.

The sidebag cover in the door lining and the side paneling must be replaced after the sidebag has been deployed.

Otherwise the airbag cannot be guaranteed to function correctly.