Connect STAR DIAGNOSIS and read out fault memory - AD00.00-P-2000-04A

Illustrated on model 210 

Fig 1: Connecting STAR DIAGNOSIS

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

1. Connect Star Diagnosis (0100).
2. Switch on ignition.
3. Start the Diagnosis Assistance System.
4. Select the model series in the menu.

   The work procedures in the diagnosis program are menu assisted.

5. Disconnect STAR DIAGNOSIS (0100).

   Stored faults which may be caused by disconnecting cables or by simulation during testing operations must be deleted in the diagnostic trouble code memory following completion of the operations.