Remove/install compressor - AR32.22-P-2001TA: Notes

MODEL 211.2 except CODE (489) Airmatic (semi-active air suspension) 

MODEL 211.6 

Fig 1: Identifying Compressor Components - Model 211.2 Except Airmatic Model 211.6

	Remove/install
1.1	Remove front section of bottom section of soundproofing	Vehicles with diesel engines	AR94.30-P-5300T
1.2	Remove front section of engine compartment paneling	Vehicles with gasoline engines	AR61.20-P-1105T
2	Disconnect pressure line connection (1) from AIRmatic compressor unit (A9/1)	Plug the pressure line for the duration of the repair operations. If pressure line connections or pressure lines are damaged: ↓
		Repair supply line connection for air suspension.	AR32.22-P-2001-01T
			*BA32.22-P-1004-03A
	Notes on air suspension		AH32.22-P-1000-01T
3	Remove intake hose from air filter (2)	Installation:  If the air filter is replaced, the arrow on the air filter must be pointing up.
4	Unscrew nuts (arrows) and remove AIRmatic compressor unit (A9/1)		*BA32.22-P-1003-03A
5	Detach electrical connector (3) from pressure relief valve
6	Disconnect electrical connector (4)
7	Install in the reverse order
8	Check air suspension for leaks		AR32.22-P-8000T

AIR SUSPENSION