Remove/install compressor - AR32.22-P-2001T: Notes

MODEL 211.0 /2 with CODE (489) AIRmatic (semi-active air suspension)

Fig 1: Identifying Compressor Components - Model 211.0/2 With Airmatic (Semi-Active Air Suspension) Code 489

G04984657

	Remove/install
1.1	Remove front section of bottom section of soundproofing	Vehicles with diesel engines	AR94.30-P-5300T
1.2	Remove the front section of the lower engine compartment paneling	Vehicles with gasoline engines	AR61.20-P-1105T
2	Disconnect pressure line connection (1) from AIRmatic compressor unit (A9/1)	Plug the pressure line for the duration of the repair operations.
	Notes on AIRmatic		AH32.22-P-1000-02T
			*BA32.22-P-1004-03A
			Figure
3	Remove intake hose from air filter (2)	Installation: If the air filter is replaced, the arrow on the air filter must be pointing up.
4	Unscrew nuts (arrows) and remove AIRmatic compressor unit (A9/1)		*BA32.22-P-1003-03A
5	Disconnect electrical connector from AIRmatic pressure reduction valve (A9/1y1)
6	Disconnect electrical connector (3)
7	Install in the reverse order
8	Check AIRmatic for leaks.		AR32.22-P-8100T

TORQUE SPECIFICATION

AIR SUSPENSION

Number	Designation			Model 211 with code 489 (Airmatic)
BA32.22-P-1003-03A	Nut, compressor to bracket	M5	Nm	3
BA32.22-P-1003-03A	Nut, compressor to bracket	M6	Nm	6
BA32.22-P-1004-03A	Pressure line, air suspension to compressor		Nm	2

Fig 2: Identifying Wrench Socket (211 589 00 09 00)

G04984658