Remove/install driver's side interior fuse box - AR54.15-P-1310T

MODEL 211.0/ 2/ 6 

Fig 1: Identifying Interior Fuse Box Components (Driver's Side)

	Remove/Install
1	Disconnect battery ground cable	Model 211.0/6	AR54.10-P-0003T
		Model 211.2	AR54.10-P-0003TA
2	Unclip cover (1) from instrument panel (2).		Fig 2
3	Remove fuses (3).	For installation location of fuses (3) see fuse assignment plan.
	Risk of fire and explosion  caused by machining/treating magnesium components	Keep away from ignition sources and open flames.	AS60.00-Z-0006-01R
4	Remove bolts (4)	The crossmember under the instrument panel (2) is made of a magnesium alloy.
	Information on machining/treating magnesium components		AH60.00-P-0023-01R
5	Remove interior fuse box (F34) from crossmember under the instrument panel (2) until the back of the interior fuse box (F34) is accessible
6	Detach positive lead (5) from interior fuse box (F34).
7	Unclip fuse holder (6) from interior fuse box (F34).	To do this, press back hooks (7) with screwdriver. Number of fuse holders (6) varies depending on equipment configuration. Installation:  Observe color coding of fuse holder (6). Route electric cables without crossing over.
8	Remove plug contacts (8) and plug contact (arrow) from interior fuse box (F34)	Installation:  Observe installation location as with an incorrect assignment of plug contacts (8) and plug contact (arrow) there is a risk of damage to the electrical system. Installation:  route electric cables without crossing over.
			*WH58.30-Z-1002-32A
9	Remove interior fuse box (F34).
10	Install in the reverse order

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1002-32A	Commercially available pressing tools for E95, SPT and MPT contacts