Remove/install additional battery - AR54.10-P-0007T
MODEL 211.0 /2 /6 up to 31.5.06
Shown on model 211.0
| Remove/install | |||
|---|---|---|---|
| 1 | Disconnect battery ground cable | Model 211.0/6 | AR54.10-P-0003T |
| Model 211.2 | AR54.10-P-0003TA | ||
| 2 | Open engine hood and raise to vertical position | AR88.40-P-1000T | |
| 3 | Remove housing (1) | ||
| 4 | Open negative terminal cover (2) of additional battery (G1/1) | ||
| 5 | Unscrew bolt (4) of ground line and remove ground line | *BA54.10-P-1013-01C | |
| 6 | Open positive terminal cover (3) on additional battery (G1/1) | ||
| 7 | Remove bolt (4) from positive line | *BA54.10-P-1013-01C | |
| 8 | Unscrew nut (5) and fold bracket (6) upward | *BA54.10-P-1014-01C | |
| 9 | Remove the auxiliary battery (G1/1). | ||
| 10 | Install in the reverse order |
| Number | Designation | Model 211 | ||
|---|---|---|---|---|
| BA54.10-P-1013-01C | Bolt, battery cable to battery terminal on additional battery | M6 | Nm | 3 |
| BA54.10-P-1014-01C | Nut, bracket for additional battery | M6 | Nm | 3 |