Remove/install side paneling in rear - AR68.30-P-4780TX

MODEL 219.3 

Shown on left 

Fig 1: Identifying Rear Side Paneling Remove/Install Components - Shown On Left

Courtesy of MERCEDES-BENZ USA

	Removal/installation
1	Remove left and right rear seat cushion		AR91.12-P-1020TX
2	Remove expansion clip (2)
3	Fold over insulating mat (4) and unscrew nut (3)
4	Remove edge guard (5) in area of side paneling (1)
5	Unclip side paneling (1) from C-pillar	Position retaining clips on C- pillar, if necessary replace defective retaining clips.
6	Install in the reverse order