Remove/install steering column module - AR54.25-P-2802PQ
MODEL 203 as of 24.4.04, 209 as of 1.6.04
Shown on model 203
MODIFICATION NOTES
| 25.11.08 | Perform initialization of DTR control unit after replacing steering column tube module, added | Operation step 7 |
| Remove/install | |||
| Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. | Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply. | AS91.00-Z-0001-01A | |
| Notes on performing repair, body work and welding on vehicles with airbags and ETR units | Model 169, 171, 199, 203, 209, 211, 215, 219, 220, 230, 240 Model 463.243/244/245/246/247/248/249/250/254/270/271/309/322/323/ 332/333 |
AH91.00-P-0002-01M | |
| 1 | Remove transmitter key from electronic ignition switch control unit | ||
| 2 | Remove steering wheel | AR46.10-P-0100P | |
| 3 | Do not twist fanfare horns and airbag clock spring contact (A45) | ||
| 4 | Unscrew bolt (1) fully | ||
| 5 | Detach steering column module (N80) | ||
| 6 | Install in the reverse order | ||
| 7 | Perform initialization of DTR control unit with STAR DIAGNOSIS | After replacing steering column tube module (N80) on vehicles with code (219) Distronic (DTR) |