Removing and installing air intake grille on engine hood - AR88.40-P-3001Q

MODEL 209 

Fig 1: Identifying Air Intake Grille On Engine Hood Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Open engine hood		AR88.40-P-1000Q
2	Unscrew screws (1)
3	Open cable strap
4	Close engine hood		AR88.40-P-1000Q
5	Lightly lift air inlet grate (2) and unlock clips (3).	Check clips (3), replace if necessary.
6	Remove air inlet grate (2), turn and lay down on suitable subsurface	Avoid damage to paint on engine hood and air inlet grate (2)
7	Unclip left (4), right (5) windshield washer nozzle
8.1	Unclip C-AAC sun sensor (4 in total) (B32/2)	With comfort automatic air conditioning, code 581b
9	Expose lines and hoses and remove from air inlet grate (2)	It is not necessary to disconnect couplings and hoses.
10	Install in the reverse order
11	Test for proper operation Check windshield washer system fluid level, correct		AP82.35-P-8210P