Remove/install trim at C-pillar - AR68.30-P-4490Q

MODEL 209.3 

Fig 1: Identifying C-Pillar Trim, Side Air Bag Cover, Belt Trim And Edge Guard

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Note on function reliability of windowbag		AH91.60-P-0693-01A
1	Unclip SRS airbag covering (1)
2	Remove bolt (2)
3	Pry off paneling (3)	Bring assembly wedge near the clamps (arrows) and pry off paneling (3).
			Fig 2
4	Remove paneling (3)	Remove paneling (3) from rear shelf toward front.
5	Guide belt strap (4) through slot (5)	Vehicles without code P98 Black Series
		Installation:  Check belt strap (4) for proper function.
6	Install in the reverse order
7	Align edge guard (6) after installation in area of paneling (3)

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA