Remove/install paneling belt in rear - AR68.30-P-4782QBS (Black Series)

MODEL 209 with CODE (P98) Black Series 

Fig 1: Removing/Installing Paneling Belt In Rear - Black Series

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Unclip lower paneling (1) and remove; for this purpose, pull toward front at bottom (see arrow)
2	Unscrew bolts (2s) and remove upper paneling (2)
3	Unclip paneling (4) and remove
4	Unclip panelings (5) and remove
5	Unclip seat shells (3) and remove	The seat shells are clipped in at 4 points and can only be unclipped with high force.
6	Install in the reverse order