Remove/install fresh air/air recirculation flaps actuator motor - AR83.10-P-2001SX

MODEL 216.3, 221.0/1 

Shown on model 221 

Fig 1: Identifying Fresh Air/Air Recirculation Flaps Actuator Motor, Damping Mat, Electrical Connector And Bolts

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove instrument panel	Model 216	AR68.10-P-1000SC
		Model 221	AR68.10-P-1000SX
2	Fold up damping mat (1) and remove air duct for the right side air vent from air conditioner housing
3	Remove fresh air/air recirculation flaps actuator motor (M2/5) from air conditioner housing	Installation  : When replacing, adjust position of the air recirculation flap drive shaft to the position of the actuating drive on the fresh air/air recirculation flaps actuator motor (M2/5).
4	Install in the reverse order
5	Teach in and normalize fresh air/air recirculation flaps actuator motor (M2/5)	Menu item: control unit adaptations, teach in actuator motors, normalize actuator motors.
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-P-2000-04A
		STAR DIAGNOSIS diagnostic system	*WH58.30-Z-1048-13A

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1048-13A	STAR DIAGNOSIS diagnostic system, Compact Passenger Car	6511 1801 00