Remove and install left blend air flap actuator motor - AR83.10-P-2002SY

MODEL 216.3, 221.0/1 

Upper left blend air flap actuator motor 

Illustrated on model 221 

Fig 1: Identifying Upper Left Blend Air Flap Actuator Motor, Electrical Connector And Bolt

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove additional fan for instrument cluster/COMAND display		AR54.30-P-6000SX
2	Remove upper left blend air flap actuator motor (M2/30) from air conditioner housing	Installation  : Match the position of the connection of the upper left blend air flaps to the position of the actuating drive in the upper left blend air flap actuator motor (M2/30).
3	Install in the reverse order
4	Teach in and normalize upper left blend air flap actuator motor (M2/30)	Menu item: control unit adaptations, teach in actuator motors, normalize actuator motors.
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-P-2000-04A
		STAR DIAGNOSIS diagnostic system	*WH58.30-Z-1048-13A