Correct oil level in air conditioning system if system is suddenly drained - AR83.30-P-5253PB

MODEL 204, 207, 212, 216, 218, 221 

	Checking
	Risk of explosion  caused by welding or soldering work on closed air conditioning system. Risk of poisoning  caused by inhaling overheated refrigerant vapors. Risk of injury  to skin and eyes caused by contact with liquid refrigerant.	Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated areas. Carry out repair work on the air conditioning system circuit only after the system has been drained.	AS83.00-Z-0001-01A
	Procedure for a damaged or leaky air conditioning system		AH83.30-N-0004-01A
	Protect air conditioning circuit and components from moisture when carrying out repair work	All models with air conditioning	AH83.30-N-0005-01A
	Notes on handling R134a refrigerant	All models with R134a refrigerant	AH83.30-N-0003-01A
1	Check components for automatic air conditioning for damage	System drained	AR83.30-P-1761PS
		If damage or leaks are found, see: ↓ Replace defective component.
		Installation  : Each time the refrigerant circuit is opened, the desiccant cartridge or fluid reservoir must be replaced, see ↓ Remove/install desiccant cartridge:
		Model 216.3, 221.0/1	AR83.30-P-6520SX
	Fill
2	Connect air conditioning service unit and evacuate/fill air conditioning system	When charging air conditioning system, add new oil to refrigerant circuit in the amount equal to the quantity of oil extracted. Observe additional oil filling quantity after replacing parts, see: ↓
		Correct oil level in air conditioning system after replacing parts. Air conditioner service unit   Additional oil filling quantity if system suddenly drains	AR83.30-P-5252PB
		Model 216, 221	*BF83.55-P-1002-01H
		Refrigerant filling capacity: Model 204, 207, 212, 218	*BF83.00-P-1001-01I
		Model 216, 221	*BF83.00-P-1001-01H
	Checking
3	Check air conditioning system for leakage	System filled	AR83.30-P-1761UV

AIR CONDITIONING SYSTEM/AUTOMATIC AIR CONDITIONING

Number	Designation			Model 216
BF83.00-P-1001-01H	Filling capacity air conditioning system/automatic air conditioning	Refrigerant R134a	g	1070
		Specifications for Operating Fluids	Sheet	BB00.40-P-0361-00 A

REFRIGERANT COMPRESSOR

Number	Designation			Refrigerant compressor in model 216
BF83.55-P-1002-01H	Additional oil filling quantity following sudden draining of system (e.g. line ruptured)	Compressor oil	cm3	40
		Specifications for Operating Fluids	Sheet	BB00.40-P-0362-00 A