Remove/install retaining lock for crankshaft / ring gear - AR03.30-P-5000SZ

ENGINE 275 in MODEL 216, 221 

Fig 1: Identifying Retaining Lock For Crankshaft/Ring Gear

Courtesy of MERCEDES-BENZ USA

	Install/remove
1	Remove starter		AR15.30-P-7100SZ
2	Insert retaining lock (1)	Slide retaining lock (1) into starter opening and allow to latch in starter ring gear; crank engine at crankshaft in direction of rotation if necessary.
			*285589024000
3	Remove in the reverse order

Fig 2: Identifying Retaining Lock (285 589 02 40 00)

Courtesy of MERCEDES-BENZ USA