LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2007 >> CL600 >> Repair and Diagnosis >> Electrical >> Body Electrical >> Connectors & Wiring -- Cl600 (216.376) >> Testing & Repair >> Remove/install freewheeling device - AR00.60-P-1500A

Remove/install freewheeling device - AR00.60-P-1500A

MODEL 164, 204, 212, 216, 218, 221, 251 

Fig 1: Identifying Freewheeling Device
G07537047Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Installing, removing     
    NOTESWarning!  Before mounting the SPECIAL TOOL freewheeling device (2) make sure that the vehicle is at a ready to drive level, to avoid any damage to the body. On all vehicles, the SPECIAL TOOL freewheel (2) may only be installed on the rear axle in order to prevent damage to the SPECIAL TOOL freewheel (2) and the body caused by turning in the steering wheel. With the SPECIAL TOOL freewheel (2) installed, the vehicle may only be maneuvered manually (at max. 5 km/h or 3 mph); driving or towing the vehicle is not permissible.  
    NOTES Model 204, 212, 216, 218, 221 with 4Matic In addition to the SPECIAL TOOL freewheel (2), the front wheels must also be raised when maneuvering. Use floor jack or other maneuvering aid.  
    NOTES Engage parking brake. To secure the vehicle against driving off and rolling away on its own.  
1 Raise vehicle at rear    
2 Remove rear wheel (3) IMPORTANT  
REFER TO MAINTENANCE Take off/fit on wheel Model 164 AP40.10-P-4050Z
REFER TO MAINTENANCE   Model 204 10-P-4050CW
REFER TO MAINTENANCE   Model 212, 218 AP40.10-P-4050EW
REFER TO MAINTENANCE   Model 216, 221 AP40.10-P-4050SX
REFER TO MAINTENANCE   Model 251 AP40.10-P-4050RT
3 Install limp-home mode buffer Model 212, 216, 218, 221 with defective air suspension
Front axle:
Model 212, 218
AR32.00-P-1000EW
Model 216, 221 AR32.00-P-1000SX
Rear axle
Model 212, 218
AR32.00-P-1000EW
4 SPECIAL TOOL Mount freewheeling device (2) to wheel hub (1) SPECIAL TOOL Fig 2
TORQUE SPECIFICATION Model 164, 251 *BA40.10-P-1002-01J 
TORQUE SPECIFICATION Model 204, 212, 218 *BA40.10-P-1004-01M 
TORQUE SPECIFICATION Model 216, 221 *BA40.10-P-1002-01L 
5 Mount wheel (3) to SPECIAL TOOL freewheeling device (2) TORQUE SPECIFICATION Model 164, 251 *BA40.10-P-1003-01J 
TORQUE SPECIFICATION Model 204, 212, 218 *BA40.10-P-1005-01M 
TORQUE SPECIFICATION Model 216, 221 *BA40.10-P-1003-01L 
6 Remove in the reverse order    
WHEELS

Number Designation Model 204 except 204.9 Model 204.9 Model 212 Model 218
BA40.10-P-1004-01M Wheel freewheel to wheel hub Nm 80 80 80 80
BA40.10-P-1005-01M Wheel to wheel freewheel Nm 80 80 80 80
WHEELS

Number Designation Model 216 Model 221
BA40.10-P-1002-01L Wheel freewheel to wheel hub Nm 80 80
BA40.10-P-1003-01L Wheel to wheel freewheel Nm 80 80
WHEELS

Number Designation Model 164 Model 251
BA40.10-P-1002-01J Wheel freewheel to wheel hub Nm 80 80
BA40.10-P-1003-01J Wheel to wheel freewheel Nm 80 80
Fig 2: Identifying Freewheel (164 589 03 63 00)
G07537048Courtesy of MERCEDES-BENZ USA