Checking rear axle camber - AR40.20-P-0331SX

MODEL 216, 221.0 /1 

	Checking
1	Checking rear axle camber	Camber at vehicle level: Model 216	*BE40.20-P-1001-09BB
		Permissible difference in rear axle camber between the right and left side of the vehicle: Model 216	*BE40.20-P-1002-09BB
		The camber on the rear axle is not adjustable. In the event of larger deviations in camber at the rear axle the following causes may exist: Excessive difference in the vehicle level between the left and right sides of the vehicle. Accident damage to the frame floor. Discrepancies in the levels of the mounting points for the rear axle carrier between right and left body side. Experience shows that deformations caused by an accident also has an effect on the toe. Check unacceptable deformations on the body: ↓ Check accident vehicles and vehicles possibly damaged in an accident.	AR40.30-P-0400SX

REAR AXLE CAMBER

Number	Designation			Model 216 except 4MATIC	Model 216 with 4MATIC
BE40.20-P-1001-09BB	Camber at vehicle level	0°	∠°	-	-1° 25' (±30')
		-1.0°	∠°	-1° 38' (±30')	-
		-1.5°	∠°	-1° 45' (±30')	-1° 45' (±30')
		-2.0°	∠°	-1° 52' (±30')	-
		-2.5°	∠°	-2° 00' (±30')	-
		-3.0°	∠°	-2° 09' (±30')	-2° 09' (±30')
		-3.5°	∠°	-2° 17' (±30')	-
		-4.0°	∠	-2° 25' (±30')	-
		-4.5°	∠	-	-2° 34' (±30')
BE40.20-P-1002-09BB	Permissible difference in rear axle camber between right and left sides of the vehicle		∠°	30'	30'