Notes on installing brake hoses - AH42.10-P-9406-01A

Model 129, 140, 166, 170, 171, 172, 197, 202, 203, 204, 207, 208, 209, 210, 211, 212, 215, 216, 218, 219, 220, 221, 230, 240, 636, 638, 639 

Only install brake hoses which are approved by Mercedes-Benz (51).

When connecting brake hoses (51) ensure that the brake hose (51) is not assembled twisted (free of twists). An adequate distance from other axle components must be guaranteed in all driving situations.

Model 129, 140:

A locking plate with bi-hexagon or multipoint profile (60) is attached to the bracket (52). Insert brake hose (51) in the retainer plate (60) so that it does not chafe on vehicle parts on full left and right steering angle and at full bump and rebound travel.

Model 166, 170, 171, 172, 197, 202, 203, 204, 207, 208, 209, 210, 211, 212, 215, 216, 218, 219, 220, 221, 230, 240, 638, 639:

On the brake hose connection piece there are two elevated sections (arrow) which lock the brake hose in the multipoint profile of the bracket.

Ensure that the retaining spring (1) is correctly installed.