Pressing out and pressing in radial seal ring on side of rear axle housing - AR35.31-P-0540-05G

Replace radial seal ring and smear sealing lip with Universal hypoid transmission fluid: ↓ 

Universal hypoid transmission fluids (SAE 85 W-90) 

Fig 1: Identifying Puller (124 589 01 15 00)

Fig 2: Identifying Drift Punch (129 589 02 33 00)

Pressing out 

1. Attach puller (071) behind radial seal ring (70j).
2. Pull out radial seal ring (70j).
   Fig 3: Attaching Puller Behind Radial Seal Ring

   

Pressing in 

3. Smear sealing lip of new radial seal ring (70j) with Universal hypoid transmission fluid.
4. Press in radial seal ring (70j) with alignment tool.
   Fig 4: Identifying Radial Seal Ring And Alignment Tool